NovaPep
Wolverine Blend (BPC-157 + TB-500)
10 mg vial
$69
Peptide Blends Australia: Shop Wolverine Blend, KLOW and More Online
NovaPep has peptide blends for sale in Australia, each combining two to four compounds in a single vial. Choose from the Wolverine Blend (BPC-157 plus TB-500), the GLOW and KLOW copper peptide blends, the tesamorelin and ipamorelin blend, and the CJC-1295 and ipamorelin blend. We lab test every component of every blend, link each vial to a certificate of analysis through its lot number, and ship from inside Australia.
Shop all 5 peptide blends online
NovaPep
NovaPep
KLOW
80 mg vial
$139
NovaPep
CJC-1295 and Ipamorelin Blend
10 mg vial
$65
NovaPep
Tesamorelin and Ipamorelin Blend
13 mg + 3 mg vial
$129
NovaPep
GLOW Peptide
70 mg vial
$129
Buy Peptide Blends Australia Labs Use to Cut a Reconstitution Step
A blend makes sense when two or more peptides are meant to sit together in one vial as a single lyophilised cake. Your lab mixes once, records one lot number and manages one container rather than a handful. The compromise is that the ratio is set during manufacture, so you cannot adjust the components separately. Blends work best when the combination is itself the test article and the protocol already defines the proportions. If your study pits one compound against another, single vials are the smarter buy.
Run single vials as controls beside any blend. Since all the components live in the same cake, they share an identical storage history and the same handling steps, which takes away one source of variation between arms. The flip side is that a blend cannot tell you which ingredient caused an effect, and it is the single compound controls that allow a design to link each result to its origin.
Order the Wolverine, GLOW and KLOW Repair Blends Online
The Wolverine Blend gives you a 10 mg vial containing 5 mg of BPC-157 and 5 mg of TB-500. TB-500 is a synthetic derivative of thymosin beta-4, and BPC-157 is a chain of 15 amino acids taken from a protein found in gastric juice. They are researched through separate mechanisms in muscle, tendon and wound models, and paired so frequently that many labs would rather have them in one vial. To see how they stack up individually, read our guide to BPC-157 vs TB-500. Buy the Wolverine Blend online in Australia and both components are confirmed by mass spectrometry on the lot certificate.
KLOW contains BPC-157, TB-500 and GHK-Cu along with KPV, the tripeptide Lys-Pro-Val used in inflammation research, in an 80 mg vial. GLOW combines the same pair with the copper peptide GHK-Cu, making a 70 mg vial that is mostly GHK-Cu. Expect both powders to look blue, a normal result of the bound copper. If KPV has a place in your design, choose KLOW. It costs a little more per vial than GLOW yet works out cheaper per milligram. GLOW is for sale in Australia as a 70 mg vial, and KLOW ships from the same local stock as an 80 mg vial.
Shop Growth Hormone Secretagogue Blends Online
The CJC-1295 and ipamorelin blend is designed for pulsatile release work. It pairs ipamorelin, a selective agonist of the ghrelin receptor, with CJC-1295 No DAC, a GHRH analogue sometimes called Modified GRF 1 to 29 that has a half-life of about 30 minutes. The result is two distinct pituitary pathways in a single 10 mg vial, with the short acting CJC component keeping every pulse short. Order the CJC-1295 and ipamorelin blend online in Australia with a certificate for its lot.
Only the tesamorelin and ipamorelin blend has unequal parts, combining 13 mg of tesamorelin, the complete 44 amino acid GHRH analogue, with 3 mg of ipamorelin. Labs mostly buy it for body composition studies that need a large GHRH share next to the ghrelin receptor route. You can buy the tesamorelin and ipamorelin blend online from our Australian stock, tracked to every state. Additional secretagogues are sold as single vials in our growth hormone peptides collection.
Buy the Best Peptide Blends for Your Study Design
For combined tissue repair models without a copper component, go with the Wolverine Blend. When repair and skin remodelling are studied side by side, GLOW is the choice, and KLOW takes over once an inflammation endpoint enters the protocol. The CJC-1295 and ipamorelin blend is the obvious match for pulsatile growth hormone release, and the tesamorelin and ipamorelin blend fits GHRH weighted designs. Should your method require changing the share of one component, buy the individual peptides instead. A blend is normally cheaper than the matching single vials, but separate vials let you choose the ratio, so the best peptide blends for any project are those whose fixed ratio your protocol already specifies.
Order Blends With a Plan for Mixing and Storage
Add bacteriostatic water to any blend order, and check the total fill weight on the product listing before you reconstitute, since each component's concentration depends on how much of the vial it makes up. In the two equal part blends, each compound accounts for half the fill, whereas the tesamorelin and ipamorelin vial is divided 13 to 3. Lyophilised blends last longest frozen at minus 20 °C and shielded from light, though 2 to 8 °C is fine for brief periods. After mixing, store the vial in the fridge and use it within 28 days as a rule, as outlined in our guide to peptide storage. Bacteriostatic water for sale in Australia comes in 3 mL, 10 mL and 30 mL vials and ships in the same parcel.
Shop Peptide Blends Near Me, Verified Component by Component
A blend can only be trusted as far as its weakest ingredient, so every part must be confirmed. For each lot, an independent laboratory runs mass spectrometry for every compound the vial should hold, plus HPLC for purity. Enter the lot number from your vial in our COA library to view the certificate. When payment clears before 3pm on a business day, we ship that day with tracking to every state and territory. Our peptide calculator takes the total fill weight and tells you the concentration after mixing. All blends are sold to adults 18 and over for laboratory research only, carry no TGA approval, and come with no advice on use in animals or people.
Shop Peptide Blends for Sale by Size and Format
| Blend | Fill | Format | Best for |
|---|---|---|---|
| Wolverine Blend | 10 mg (5 mg BPC-157, 5 mg TB-500) | Glass vial, lyophilised blend | Tissue repair with one reconstitution |
| CJC-1295 and Ipamorelin Blend | 10 mg | Glass vial, lyophilised blend | Pulsatile growth hormone release work |
| Tesamorelin and Ipamorelin Blend | 13 mg + 3 mg | Glass vial, lyophilised blend | Tesamorelin led growth hormone studies |
| GLOW | 70 mg | Glass vial, lyophilised blend | Copper peptide skin and repair research |
| KLOW | 80 mg | Glass vial, lyophilised blend | GLOW designs that also need KPV |
Peptide Blends FAQ
What is a peptide blend?
A peptide blend is a vial in which two or more research peptides are lyophilised together into a single cake. NovaPep offers five of them, namely GLOW, KLOW, the Wolverine Blend, the tesamorelin and ipamorelin blend, and the CJC-1295 and ipamorelin blend. They cut down on reconstitution and keep every component on one lot, in exchange for a fixed ratio.
Does a blend cost less than separate vials?
In most cases, yes. The CJC-1295 and ipamorelin blend costs less than the two single vials. The Wolverine Blend also costs less than the same 5 mg of BPC-157 and 5 mg of TB-500 bought as singles, worked out pro rata. Individual vials cost more but let you decide each compound's share.
What does the Wolverine Blend contain?
It contains 5 mg of BPC-157 and 5 mg of TB-500 in a single 10 mg lyophilised vial. TB-500 is a synthetic peptide modelled on thymosin beta-4, and BPC-157 is derived from a protein in gastric juice. Each is researched through its own mechanism in wound, tendon and muscle models.
How does NovaPep test its peptide blends?
Every lot of every blend is tested by an independent laboratory, which confirms each component by mass spectrometry and measures purity by HPLC. The lot number printed on the label brings up the matching certificate in our COA library, so you can verify the exact batch you hold before reconstituting it.
How do I calculate the concentration of a peptide blend?
Begin with the total fill weight shown on the label. For example, adding 2 mL of bacteriostatic water to the 10 mg Wolverine Blend vial gives 5 mg per mL of total peptide, which is 2.5 mg per mL of each component. The NovaPep peptide calculator works for any fill weight and volume.